Now you have the custom patches which you have spent much time getting in your hands. Here comes the problem: how to iron on the new patch onto your garment? Relax, it’s easy. Here are some detailed instructions to help you apply the patch on your clothes.

Essentials
Essentials

Before we go, let’s get the following essentials ready: aT-Shirt (or other garments you want to apply the custom patches on), iron, the ironing board or other flat surface, a piece of thin towel. Then you need nothing more than a little bit of patience.

STEP 1- Determine the iron surface.

Determine the iron surface
Determine the iron surface

First of all, you have to decide the best place to iron on your custom patches, our suggestion is: place the patches on different positions to check the overall appearance. If there is more than one kind of patch you need to put, please double-check the place to see if it is big enough for another patch. Then find your favorite position and move on.

Place your T-Shirt on the ironing board, and then iron the place where the patch will go. Make sure that there is no wrinkle in your T-Shirt. It takes around 10-20 seconds. Thick material garments or bags need longer.

STEP 2- Place the Towel.

Place the Towel
Place the Towel

(picture from:Wikihow.com)

It requires a clean, white towel which should not be too thick nor too thin. It plays a huge role in protecting the clothes getting burned by the iron. In addition, the towel can greatly lower the risk of discoloration effect. That is why placing a suitable towel in the right position is so important.

STEP 3- Iron the Custom Patch.

Iron the Custom Patch
Iron the Custom Patch

(Figure 1from youtube.com)

Placing the patch above the towel and covering the place which you have chosen, and checking the garment to see if there are any places wrinkled or unfolding.  Next, you need to move the iron slowly, forward and backward. Generally speaking, it requires 10 seconds to iron on the patch. Then turn over your garment and iron the backside with more time. NO water is allowed during the ironing.

STEP 4- Cool It.

Once you have finished the ironing, you can take away your iron and leave the patches alone. The garment with patches will be cool down in several minutes and you can have a try of your new T-Shirt.

Though we have paid enough attention to ironing on the patches which would not be removed easily, we highly suggest garments with patches washed by hands rather than a washing machine.

Cool It
Cool It

(Figure 2from wikihow.com)

Now, do you have an idea to iron on your new patch after reading the blog?

Give a good point

Leave a Reply